9393·皇冠(中国)足球体育入口-Made in China

MT插芯

特点
技术规格
规格书下载

High density
Fiber pitch: 0.25mm
Mold marks to indicate fiber type and ferrule grade
Pre-angled SM
MM MT low Loss optimized for 10G, 40G, 100G and 400G applications
SM MT low loss meets IEC 61755-3-31 Grade B requirements
With exceptional environmental stability after annealing

Ferrule Hole	Type & Grade	Fiber Hole Diameter(mm)	Guide Pin Hole Diameter(mm)	Insertion Loss(dB)
MT-12	MM Standard	0.125+0.002/-0	0.7±0.001	Typical=0.25 Max≤0.5
	MM Low Loss	0.125+0.002/-0	0.7+0/-0.001	Typical=0.12 Max≤0.35
	SM Standard	0.125+0.0013/-0	0.7+0/-0.001	Typical=0.25 Max≤0.7
	SM Low Loss	0.125+0.0009/-0	0.6990+0.0006/-0	Typical=0.12 Max≤0.35
MT-24	MM Standard	0.125+0.002/-0	0.7±0.001	Typical=0.25 Max≤0.5
	MM Low Loss	0.125+0.002/-0	0.7+0/-0.001	Typical=0.12 Max≤0.35
	SM Standard	0.125+0.0013/-0	0.7+0/-0.001	Typical=0.25 Max≤0.7
	SM Low Loss	0.125+0.0009/-0	0.6990+0.0006/-0	Typical=0.12 Max≤0.35
MT-16	MM Standard	0.125+0.002/-0	0.55±0.001	Typical=0.25 Max≤0.5
	MM Low Loss	0.125+0.002/-0	0.55+0/-0.001	Typical=0.12 Max≤0.35
	SM Standard	0.125+0.0013/-0	0.55+0/-0.001	Typical=0.25 Max≤0.7
	SM Low Loss	0.125+0.0009/-0	0.5490+0.0006/-0	Typical=0.12 Max≤0.35
MT-36	MM Standard	0.125+0.002/-0	0.7±0.001	Typical=0.25 Max≤0.5
MT-12-Mini	MM Standard	0.125+0.002/-0	0.7±0.001	Typical=0.25 Max≤0.5
MT-12-Mini	MM Low Loss	0.125+0.002/-0	0.7+0/-0.001	Typical=0.12 Max≤0.35

法律声明友情链接备案号:粤ICP备05065787号

Copyright © 2019 皇冠9393体育官方网站 Designed By Wanhu.

顶部